eLaws | eCases | California Laws | California Code of Regulations | Illinois Courts | Counties & Cities of California | Code of Federal Regulations | United States Code |
 Del Mar
 Municipal Code
 Title 23. BUILDING CONSTRUCTION
 Chapter 23.08. DESIGN REVIEW

  § 23.08.030. General Scope of Requirement.  

Latest version.

  • A Design Review Permit shall be required for the construction, relocation, alteration, remodeling or other modification of the exterior of all structures, whether public or private, except as follows:

    A.

    Except as provided in Subsection B. or C. below, no Design Review Permit is required for the repair, restoration or reconstruction of a structure where such work maintains the outer dimensions and surface relationships of the existing structure.

    B.

    For projects located within the CC, NC, BC, VC, PC, or RC zones, or within the BSC, Open Space, and Historical Preservation Overlay zones, no Design Review Permit shall be required for the repair, restoration or reconstruction of a structure where such work maintains the outer dimensions and surface relationships of the existing structure, unless such work will involve a modification of the exterior design features of the existing structure or involve a change in the exterior materials or colors in existence on such structure. "Modifications of the exterior design features" as used herein, includes, but is not limited to, the addition, deletion or modification of windows, doors, overhangs and chimneys.

    C.

    For projects involving the installation of doors, windows or other transparent surfaces on portions of the outer surface of an existing structure where such doors, windows or other transparent surfaces do not currently exist, a Design Review Permit shall be obtained.

    1.

    The requirement for receipt of a Design Review Permit shall not apply for the replacement of doors, windows or other transparent surfaces that currently exist, provided the surface area of the replacement door window or other transparent surface does not exceed the size of the door window or other transparent surface to be replaced by a factor of more than ten percent and/or the replacement door window or other transparent surface is located on the same building plane and within three feet of the location of the door, window or other transparent surface to be replaced.

(Ord. No. 565; Ord. No. 784)