§ 24.54.060. Survey Data.

A.

The final map shall show the centerlines of all streets, length, tangents, radii and central angles or radial bearings of all curves, the total width of each street, the width of the portion being dedicated, and the width of existing dedication and the width of each side of the centerline; also, the width or rights-of-way of railroads, flood control or drainage channels and any other easements existing or being dedicated by the map.

B.

Surveys in connection with maps prepared pursuant to this Chapter shall be made in accordance with standard practices and principles for land surveying. A traverse of the boundaries of the subdivisions and all lots and blocks shall close. Sufficient data shall be shown to determine readily the bearing and length of each line. Dimensions of lots shall be net dimensions, and no ditto marks shall be used.

C.

Traverse sheets and work sheets showing the closure of the exterior boundaries and of each irregular block and lot shall be provided.

D.

The final map shall also have indicated thereon the following:

1.

Suitable primary survey control points.

a.

Section corners.

b.

Monuments (existing outside of subdivision).

2.

Location of all permanent monuments within the subdivisions.

3.

Ties to any City or County boundary lines involved.

4.

Ties to and identification of adjacent subdivisions.

5.

Required certificates.